Guidelines for parking layout.


Issued by: MCGM | Chief Engineer DP | 30 January 2020

  • Driveway width for one way maneuvering shall be minimum 3.0 m in width for straight alignment and 3.90 m in width for turning portion. Two way maneuvering shall be of 6.0 m in width for straight alignment & 7.50 m at turning portion.
  • Gate should be of minimum 3.50 m for one way access and 6.0 m for two way (Entry-Exit). Minimum width of the passage from Gate to Entrance lobby/ Staircase shall be 3.0 m.
  • Car lift shall be of minimum 3.30 m X 6.0 m to accommodate all kind of vehicle. Minimum 5.0 m unobstructed open space shall be provided in front of car lift hoist.
  • Ramp shall have maximum 45 m of continuous length. Mid lending of minimum 6.0 m length shall be provided at the interval of maximum 45.0 m travel distance. In case of U turn proposed on the ramp, inner dia shall be of 5.50 m turning radius. In case of plot abutting three roads, ramp shall be allowed on front marginal open space of the road having least width ingress and egress.
  • Mechanical parking systems like, Stack/Pit/Rotary/Puzzle/Tower having more than 4.50 m height above G.L. may be proposed at least 1.50 m away from the compound wall on all side except front open space. Front open space shall be minimum of 5.0 m for big cars and 4.0 m for small cars. It should be proposed along the dead wall only up to height of the building. 
  • Traffic impact analysis is required in case of more than 2000 car parks.



Loading document ...



Opinion on FAQ related to circular


Related News-Articles-Circular